Last modified 3 years ago
Last modified on 11/21/10 16:08:45
Elson Mobistel EL570
The Elson Mobistel EL570 is a Mediatek MT6227 based phone with touchscreen, mostly sold in Germany. It seems to be directly imported from China, and badged by Elson (http://www.elson.de/).
PCB scans
| DBB side (facing display) | RF side (facing back of phone) |
![]() |
|
| large version: el570_dbb_side.jpg | large version: el570_rf_side.jpg |
Connector pinout
| Pin | Signal | measured voltage | description |
| 1 | SPK_L | 800mV | left headset channel |
| 2 | SPK_R | 170mV | right headset channel |
| 3 | GND | 0V | ground, used by USB cable |
| 4 | MIC | 2,800V | microphone, also used for PTT button on headset |
| 5 | GND | 0V | ground, used by USB cable |
| 6 | GND | 0V | ground |
| 7 | ? | 0V | not connected to ground |
| 8 | ? | 2,746V | unknown |
| 9 | VBAT? | 4,030V | seems to be the battery voltage |
| 10 | USB_DM | 0V | USB D- (white) |
| 11 | USB_DP | 0V | USB D+ (green) |
| 12 | UTXD1 | 2,746V | UART Tx |
| 13 | URXD1 | 2,758V | UART Rx |
| 14 | USB_5V | 111mV | USB charging supply |
| 15 | USB_5V | 111mV | USB charging supply |
| 16 | ? | 2,796V | unknown |
| 17 | VBAT | 4,070V | battery + |
| 18 | VBAT | 4,070V | battery + |
JTAG Pinout
Bootloader
It uses the MTKRomloader.
Attachments
-
el570_dbb_side.jpg
(1.5 MB) -
added by steve-m 3 years ago.
DBB side of the EL570
-
el570_rf_side.jpg
(1.4 MB) -
added by steve-m 3 years ago.
RF side of the EL570
-
connector_pcb.jpg
(15.8 KB) -
added by steve-m 3 years ago.
EL570 connector on pcb
-
el570_serial_cable.jpg
(97.0 KB) -
added by steve-m 3 years ago.
picture of hand-crafted serial cable hold together by hot-glue ;)
-
el570_dbb_side_small.jpg
(64.4 KB) -
added by steve-m 3 years ago.
preview version: DBB side of the EL570
-
el570_rf_side_small.jpg
(64.3 KB) -
added by steve-m 3 years ago.
preview version: RF side of the EL570
-
el570_jtag.jpg
(44.9 KB) -
added by steve-m 3 years ago.
Mobistel EL570 JTAG pinout





